Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterSpring Repair in Atlanta, GA
Garage door spring repair in Atlanta typically runs $150 – $290 for a single spring replacement, and most jobs are finished the same day you call. At Marlow Garage Door Repair Atlanta, you’ll see the exact written price before any wrench turns, and every spring we install is covered by our 365-Day Done Right Promise. Call (762) 230-6145 and a live person answers, 24/7.
Springs do the heavy lifting on a garage door. When one snaps, the door becomes dead weight, often mid-cycle, leaving you either locked out or locked in. It’s the single most common repair we handle as a Garage Door Repair specialist in the metro area, and it’s also the one homeowners should never attempt themselves. The torque stored in these coils is genuinely dangerous.
Jaylen Ross and the team at Marlow Garage Door Repair Atlanta have repaired or replaced springs on every major brand sold in Georgia, from the builder-grade spring on a tract home in Peachtree Corners to the heavyweight coil above a lifted door in Buckhead. We know what fails and why, and we’ll tell you straight before we touch anything.
When You Need Spring Repair
Most people don’t know a spring is failing until it breaks. Here are the signs we hear about most often across Atlanta, from homeowners in neighborhoods like Kirkwood, Decatur, and Sandy Springs:
- The door won’t lift at all. You press the opener and hear the motor run, but the door stays put. In almost every case, that’s a broken torsion spring, the horizontal coil mounted above the door opening that does most of the lifting.
- A loud bang from the garage. It sounds like a gunshot or a car backfiring. That’s the spring snapping under load. The door will not move safely after this, and trying to force it can damage the opener.
- The door opens a few inches, then stops. One spring may be intact while the other has failed. The door is now unbalanced, and running the opener in this state can burn out the motor in a matter of days.
- The door feels heavy when you pull the emergency release. A healthy door should lift smoothly with one hand. If it takes real effort, the spring has lost tension or is nearing the end of its lifespan.
- Visible gap in the coil. You look above the door and see a two-inch separation in the spring. That’s a clean break, and it means the spring is done. No adjustment will fix it.
- The door slams down or shoots up unevenly. Uneven movement means the springs are unbalanced, a condition that also wears out cables, rollers, and opener gears faster than normal.
If any of these sound familiar, don’t keep pressing the opener button. The problem won’t self-correct, and each attempt strains the motor, the cables, and the remaining hardware. Call us at (762) 230-6145, describe what you’re seeing, and we’ll give you a straight answer on what it’ll take to fix.
Our Spring Repair Process
We built our process around a simple idea: you should know what’s happening, what it costs, and when we’ll arrive, before anything starts. Here’s exactly how it works:
- Call or book online. A live person answers the phone at (762) 230-6145 any hour of the day or night. Tell us what’s going on, or upload a photo if you’re booking through our site. We’ll schedule a visit and give you a live arrival window you can track, part of the Relay Visibility Guarantee.
- Your tech arrives and inspects. A background-checked, uniformed technician shows up, introduces themselves, and takes a close look at both springs, the cables, the bearings, and the opener. We check the whole system, because a spring failure often takes something else down with it.
- You get a written price. Before we touch a single bolt, you’ll see the exact cost in writing. That number covers the spring, the labor, and any balancing work. If you decide the repair isn’t worth it, no hard feelings, and you owe nothing.
- We replace and balance. Most spring replacements take 45 to 90 minutes. We install the correct spring for your door’s weight and cycle rating, then balance the door so it moves smoothly across the full travel.
- We test and document. We run the door through multiple cycles, verify the opener isn’t straining, and take before-and-after photos so you can see exactly what was done.
- You pay from a digital invoice. We send a link to your phone. Pay online in seconds. And your repair is covered in writing by the 365-Day Done Right Promise. If it fails within a year, we come back and make it right, free.
Spring Repair Pricing in Atlanta
Spring replacement in Atlanta typically runs $150 – $290 per spring, depending on spring type and door size. You’ll see your exact number in writing before we start, and the price on your invoice matches the price you approved, every time.
Here’s a realistic breakdown of what Atlanta homeowners can expect to pay:
- Single torsion spring replacement: $150 – $230 installed, including balancing and testing.
- Dual torsion spring replacement: $250 – $290 installed when both springs need replacement. Repairing one while the other is near failure is a false economy, and we’ll tell you when both should go.
- Extension spring replacement (older doors): $140 – $220 installed, depending on spring length and whether safety cables need updating.
- Spring conversion (extension to torsion): $300 – $450 installed. Some older Atlanta homes built in the 1960s and 70s still run extension springs, and converting to a torsion system is safer and smoother.
What affects the price? Spring cycle rating is the big one. A spring rated for 10,000 cycles costs more than a 5,000-cycle spring but lasts about twice as long under normal use. Door weight matters too, and in Atlanta, we see a lot of heat, humidity, and frequent use that wears springs faster than the national average. A spring that would last seven years in a mild climate might fail at five here.
We service doors from Raynor, LiftMaster, Chamberlain, and Genie, among others. The spring we install is matched to your specific door’s weight and balance, not a generic part off the shelf. Estimates are free, so call (762) 230-6145 for an exact number before you commit to anything.
FAQs – Spring Repair
How much does garage door spring repair cost in Atlanta?
Spring repair in Atlanta typically costs $150 – $290 per spring, with dual spring replacement running $250 – $290 and extension springs on older homes in the $140 – $220 range. Your exact price is delivered in writing before we start, and estimates are free. Call (762) 230-6145 for a precise quote on your specific door.
Can you replace my garage door spring the same day?
Yes, in nearly every case, a spring replacement is completed the same day you call. We carry springs for all the major brands on our trucks, plus the tools for track realignment if needed, so the technician who arrives has what your door needs. Call (762) 230-6145, and we’ll give you a live arrival window you can track, no waiting around in a four-hour window.
Is it cheaper to repair or replace a garage door spring?
Spring replacement is almost always the cheaper option when the spring is the only failed component, and it’s the only option when the spring has snapped, because springs can’t be repaired, only replaced. If the door panels, rollers, and opener are in good shape, a $150 – $290 spring replacement extends the door’s life by years. We’ll give you an honest assessment of the whole door and tell you if garage door repair costs make replacement the smarter choice.
Why did my garage door spring break in Atlanta?
The most common cause in Atlanta is normal fatigue, springs are rated for a set number of cycles, and a decade of humid Georgia summers plus daily use wears them out on schedule. Rust accelerates the failure, and we see it often on doors in older neighborhoods like East Point and College Park. If your spring snapped, call us at (762) 230-6145 and we’ll replace it with one rated for at least 10,000 cycles.
Can I replace a garage door spring myself?
You shouldn’t. The torsion spring above your door stores enough torque to cause severe injury or worse. The winding and unwinding requires specialized tools and years of experience. We strongly recommend a trained professional. At Marlow, every spring replacement is done by a background-checked technician and backed by the 365-Day Done Right Promise.
Is the 365-Day Done Right Promise real, or just marketing?
It’s real, and it’s written on every spring repair we do. If our repair fails within 365 days of the job, we come back and fix it at no charge. No fine print, no exclusions beyond deliberate damage. Jaylen Ross founded this business on the principle that the invoice you approve is the invoice you pay, and the repair we promise is the repair that lasts.
Spring Repair You Can See Coming
Most garage door companies in Atlanta still ask you to wait in a four-hour window and trust that the price they quote over the phone will match the bill at the door. That’s not how we work. When you book with Marlow, you get a live arrival time you can track on your phone, a written price before work begins, and a digital invoice you pay from a link. It’s the same standard we’ve held since 2002.
If your garage door spring has snapped, or if it’s showing signs of failing, call (762) 230-6145 now. A real person answers, any hour, any day. We’ll get a technician to your home, give you the price in writing, and have the door working again before the day’s out.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Atlanta, serving Atlanta.