Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Spring Repair for Atlanta Homeowners
A garage door spring snapping sounds like a gunshot in your garage, and after it happens your door won’t budge. That’s because the spring does the heavy lifting, not the opener motor. We’re Marlow Garage Door Repair Atlanta, and we’ve been fixing springs across the metro since 2002. We also offer Garage Door Spring Repair in Atlanta. Jaylen Ross leads our Atlanta team, and every tech who shows up at your door is background-checked, uniformed, and trained on eight major brands including LiftMaster and Genie. We answer the phone live, 24 hours a day, and we can usually get a tech to your home the same day you call. If you’re staring at a crooked door or a dangling cable right now, call us at (762) 230-6145 and we’ll walk you through it.
Garage Door Spring Replacement
Garage Door Spring Replacement means removing the old, worn spring and installing a new one matched to your door’s weight, height, and cycle rating. You need it when your current spring snaps, stretches, or loses enough tension that the door won’t stay up or won’t open at all. In Atlanta, spring replacement typically runs $180 – $340 depending on whether you have a single torsion spring or a two-spring setup, and you’ll see the exact number in writing before we turn a single wrench. Our techs stock springs for most residential doors on the truck, so in many cases we complete the job on the first visit. The 365-Day Done Right Promise covers every spring we install, meaning if something isn’t right within a full year, we return and make it right at no charge. Jaylen Ross has personally trained our Atlanta techs to match spring dimensions using actual door weight, not guesswork.
What a Spring Replacement Means for Your Door
A new spring restores the door’s balance, so it opens smoothly with one hand when the opener is released. That balance is the thing that keeps your opener motor from burning out early. When a spring is installed correctly, the door feels nearly weightless.
Why the Correct Spring Size Matters
Installing a spring that’s too strong or too weak throws off the entire system. The door slams or creeps, the opener strains, and cables can slip off the drums. We weigh the door and check the spring’s cycle rating before we install anything, so the replacement matches the door you actually have, not the door someone guesses you have.
Styles & brands we work with
Garage Door Torsion Spring Replacement
Garage Door Torsion Spring Replacement is the most common spring repair we handle in Atlanta, and it addresses the horizontal coil mounted above the door opening that does most of the lifting. Torsion springs are under enormous tension, and they typically last 10,000 to 20,000 cycles before they snap, often with a loud bang. When that happens, the replacement runs $180 – $340 in the Atlanta market, and the exact figure depends on whether you need one spring or a pair, and whether the spring is standard or high-cycle. We replace both springs when they were installed as a set, because if one has snapped the other isn’t far behind. The written price you approve before we start includes the new spring, labor, and a full balance test.
One Spring or Two
Doors over 8 feet wide or heavier than 200 pounds typically use two springs to split the load. If one snaps, we recommend replacing both at the same time. The second spring has already gone through the same number of cycles and will fail soon, and replacing both now costs less than two separate service calls.
High-Cycle Springs for Atlanta Homes
Standard springs are rated for about 10,000 open-and-close cycles, which lasts roughly 7 to 10 years for most Atlanta homeowners. High-cycle springs run 25,000 to 50,000 cycles and cost slightly more up front. If you plan to stay in your house another decade, the math usually favors the upgrade, and we’ll show you both prices before any work is done.
Broken Garage Door Spring
Broken Garage Door Spring is the phrase we hear most often when homeowners call us after hearing a loud snap from the garage. A broken spring means the door is effectively dead weight, and trying to force it open with the opener will strip the gears or snap a cable. In Atlanta, repairing a broken spring costs $180 – $340, and here’s the important part: the price is quoted and agreed before any work starts, so the invoice matches the number we gave you on the phone. Our techs carry torsion and extension springs for LiftMaster, Chamberlain, Genie, Raynor, and Clopay doors, so most broken spring calls are resolved in a single visit. One broken spring is a safety issue, not a projector; you cannot safely open the door yourself, and you should not try.
What to Do Right After a Spring Breaks
The best move is to leave the door closed, unplug the opener, and call us at (762) 230-6145. If your car is trapped inside, tell us when you call and we’ll prioritize your dispatch. A tech will assess the spring, the cables, and the door’s alignment before quoting a repair.
The Risk of Delaying the Repair
Every time someone presses the opener button on a door with a broken spring, the motor strains against hundreds of pounds of dead weight. That’s how a $200 spring job becomes a $500 opener replacement. We’ve seen this happen in neighborhoods all over Atlanta, from Druid Hills to Hapeville. The faster you get it fixed, the less secondary damage you’ll pay for.
Garage Door Extension Spring
Garage Door Extension Spring describes the older style of counterbalance system that runs along the horizontal tracks on either side of the door, stretching to store and release energy as the door moves. These springs are common on older Atlanta homes, especially in neighborhoods like Decatur, North Druid Hills, and Gresham Park where original garage doors are still in place. For homes in Decatur, we offer our Garage Door Spring Repair in Decatur. Extension spring repair or replacement in Atlanta runs $180 – $340, and we always replace them in pairs so both sides wear evenly. Unlike torsion springs, these are installed without a torsion tube, and a broken extension spring can whip across the garage when it fails if a safety cable isn’t present. We check that safety cable on every call and install one if it’s missing, because it can stop a spring from causing real damage or injury.
Extension Springs on Older Homes
We see extension springs most often in Atlanta homes built before the early 1990s. The door frames on these houses are sometimes wood instead of steel, and the tracks can be slightly out of square from decades of settling. We account for that framing before we hang new springs, because forcing a new spring onto a crooked track just tears up the door.
Replacing the Safety Cable Alongside the Spring
The safety cable threads through the center of the spring and anchors to the track, so if the spring breaks it stays in place instead of flying. If that cable is missing or frayed, we replace it as part of the spring job. It’s included in the written quote, and it’s non-negotiable on our end because we’re not leaving an unsecured spring in your garage.
Garage Door Spring Installation
Garage Door Spring Installation covers new doors, conversions, and full system resets where the springs are installed fresh rather than swapped like-for-like. In Atlanta, spring installation runs $180 – $340 when it’s part of a repair or replacement, and the job includes winding or tensioning the springs, setting the cable drums, and balancing the door. We install springs on new doors throughout Riverdale, Garage Door Spring Repair - Union City, and Redan, and we handle conversions from extension springs to torsion systems when a homeowner wants a quieter, safer setup. The 365-Day Done Right Promise applies to every installation, so if the door isn’t balanced correctly at any point in the next year, we fix it free. Jaylen Ross reviews every installation report from our Atlanta techs to make sure nothing leaves the truck half-done.
When a New Spring Goes In
New springs go in when a builder installs a new door, when a homeowner switches from extension to torsion, or when a previous spring job was done wrong. We also install springs after a door has been replaced but the original springs were reused, which is a mistake we see too often. The right spring is sized to the door’s exact weight, and a used spring can’t do that reliably.
New Door, New Spring, No Exceptions
If you’re installing a new garage door in Atlanta, the spring should be brand new and matched to the door panel. Reusing an old spring on a new door voids most door warranties and puts uneven stress on the new hardware. We don’t do it, and we’ll tell you why in plain English before we quote the job.
Garage Door Spring Adjustment
Garage Door Spring Adjustment is the process of adding or removing tension to correct a door that’s heavy, slams shut, or drifts upward on its own. In Atlanta, a spring adjustment runs $180 – $340 when it’s part of a broader repair, and a standalone adjustment call is a good candidate for a quick diagnosis. A door that’s slightly off balance may only need a quarter-turn adjustment on each side, but the diagnosis has to come first, because too much tension can cause the door to launch upward and too little can snap a cable. Our techs check the door weight, cycle count, and spring condition before touching the tension, and every adjustment is covered by the 365-Day Done Right Promise. We never adjust a spring that’s already fatigued or rusted to the point of failure; in those cases, the honest answer is replacement, and we’ll show you the worn spots before we recommend it.
What Good Balance Feels Like
When the springs are set correctly, you can lift the door manually with one hand and it stays at the halfway point without drifting more than a few inches. If the door feels heavy or the opener struggles, the spring tension is likely off. That strain is chewing through your opener, and a quick adjustment stops the damage before it spreads.
Don’t Adjust a Spring Yourself
Torsion springs hold enough stored energy to cause serious injury if they slip while you’re winding them. Extension springs can snap and fly. If your door is sagging or heavy, call us at (762) 230-6145 and we’ll send a tech who works with these springs every day. The cost of the adjustment is a fraction of the hospital bill or the damage an amateur winding bar can do.
Brands We Service
We service all eight major garage door brands in the Atlanta market, and our techs carry OEM parts for most residential doors. That means when a LiftMaster door in Candler-McAfee needs a spring, we’re not ordering parts and making you wait a week; we’re completing the repair on the first visit.
For Chamberlain and Genie doors, we stock the springs and cables specific to those openers, and we know how their balance requirements differ from other brands. We work on Raynor and Clopay doors as well, and our technicians are trained on the quirks of each manufacturer. Whether you have a Raynor, a Genie, or something else entirely, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- You heard a loud bang from the garage. That’s a torsion spring letting go under full tension. The door won’t open normally after that sound, and continuing to press the opener button risks the motor and cables.
- The door looks crooked when it opens. A door that rises unevenly usually means one spring has failed or one cable has slipped. Forcing the door straight and trying to run the opener anyway can pull the door out of its track.
- The door is heavy when you try to lift it by hand. With the opener disengaged, a balanced door should lift easily with one hand. If it feels like lifting a refrigerator, the spring has lost tension or broken, and you’re holding the full weight of the door.
- The door slams shut or shoots up. Too much tension sends the door flying upward; too little sends it crashing down. Both are signs the spring is out of adjustment and can damage the door or injure someone in the way.
- You can see a visible gap in the spring. A torsion spring that’s snapped shows a clear break in the coil, usually in the middle. An extension spring that’s broken hangs loose along the track. Either way, call us at (762) 230-6145 and don’t touch anything.
Our Process, Step by Step
- 1
Book online or call us. You can schedule in seconds through our site or call (762) 230-6145 and talk to a live person, 24/7. We’ll confirm your Atlanta address, ask what the door’s doing, and give you an arrival window with live tracking via The Relay Visibility Guarantee.
- 2
Your tech arrives and introduces themselves. You’ll see their photo and name before they pull into your driveway. They’re background-checked, uniformed, and trained by Jaylen Ross on eight major brands. They’ll ask you to describe what happened, then inspect the door, spring, cables, and opener together.
- 3
You receive a written price before any work starts. The tech weighs the door, checks the spring cycle rating, and writes up the exact cost of the repair. That number includes parts, labor, and any safety cables or balance checks needed. You approve it before a single wrench turns, and the invoice at the end matches that number.
- 4
The repair is completed and tested. We replace or adjust the spring, reset the cables and drums, and run the door through multiple full cycles. We test the balance manually, check the opener force settings, and make sure the door stays where you leave it. Before-and-after photos are sent to your phone.
- 5
You pay from a texted link and get your warranty. Your digital invoice includes the work performed and the 365-Day Done Right Promise in writing. If anything isn’t right within a full year, we return and fix it free. That’s the whole point of how we work.
How Much Does Garage Door Spring Repair Cost in Atlanta?
A typical garage door spring repair in Atlanta runs $180 – $340, and the range depends on the spring type, whether you need one spring or a pair, and whether the door requires high-cycle springs. Torsion spring replacement sits at the higher end of that range when you have two springs or a heavier door. Extension spring replacement usually falls on the lower end. Here’s what the broader repair landscape looks like in Atlanta:
- Garage Door Spring Repair: $180 – $340
- Cable Repair: $130 – $250
- Opener Repair: $120 – $320
- Track Realignment: $120 – $240
- Roller Replacement: $110 – $220
- New Door Installation: $700 – $2200
What affects your price? The spring’s cycle rating, the door’s weight and width, and whether the springs came as a matched pair. The fastest way to avoid overpaying is to get a written quote before any work is done, which is exactly how we operate. Every estimate we give is free and includes the full breakdown of parts and labor. Call (762) 230-6145 and we’ll give you a range over the phone based on your door, then pin the exact number on site.
Our Service Area Near Atlanta
We serve homes across the Atlanta metro, from Garage Door Spring Repair in Atlanta through Garage Door Spring Repair in Norcross and Garage Door Spring Repair in Decatur. Our techs also cover Riverdale, Union City, Redan, Conley, Druid Hills, Gresham Park, North Druid Hills, Hapeville, and Candler-McAfee. Most same-day calls in Atlanta proper get a tech within a few hours, and we route the nearest available tech to your address so you’re not waiting on someone driving across town.
Serving Atlanta, GA - Our Local Coverage Area
We’re based in the Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Spring Repair in Atlanta
Garage door spring repair means fixing or replacing the spring that counterbalances your door so it can open and close safely. In most Atlanta homes, that’s a torsion spring above the door or a pair of extension springs along the tracks. The job includes a balance test and a full check of the cables and drums. We quote the work before we start and back it with the 365-Day Done Right Promise.
Most spring repairs are finished in 45 to 90 minutes from the time we arrive. The actual replacement is fast; the time goes into weighing the door, matching the spring, installing it, and testing the balance. If your door needs both springs replaced or additional cable work, it may take a bit longer. Call (762) 230-6145 and we’ll give you a realistic window based on what you’re describing.
Garage door spring repair in Atlanta typically runs $180 – $340, depending on spring type, door weight, and whether you need one spring or a pair. The written quote you approve before we start matches the invoice you pay at the end. No surprise charges, no upsell pressure. Call us for a free estimate over the phone.
Yes. We service LiftMaster, Chamberlain, Genie, Raynor, Clopay, Amarr, Wayne Dalton, and Craftsman doors throughout Atlanta. Our techs stock OEM parts for most residential models and arrive trained on the specific quirks of each brand. Whatever name is on the opener, we can handle the spring underneath it.
Yes, in most cases. We keep same-day availability for broken spring calls across Atlanta, and we answer the phone live 24/7. Tell the person on the line that your car is trapped or the door won’t close, and we’ll prioritize your dispatch. Same-day service isn’t guaranteed for every zip code every day, but we’ll tell you honestly when we can be there.
Yes. Every spring we install or replace in Atlanta is covered by the 365-Day Done Right Promise. If the spring fails, the door won’t balance, or anything related to the repair isn’t right within one year, we return and fix it free. The promise is in writing on your invoice, not buried in fine print.
Clear the area around the garage door so the tech has full access to the tracks and the spring mounting points. If possible, park cars outside the garage and keep the door closed until we arrive. Don’t try to open the door manually or with the opener after the spring breaks. That’s all you need to do; we’ll handle the rest.
Schedule Your Garage Door Spring Repair Service in Atlanta Today
Call us at (762) 230-6145 and you’ll talk to a real person who can get a tech moving toward your house. The estimate is free, the price is locked in writing before we start, and every repair is backed by the 365-Day Done Right Promise. If your spring just snapped, don’t wait; let’s get your door working again today.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Atlanta, serving Atlanta since 2002.